Current Position:Home -> Technology -> Content
Maintenance for wrapping tmachine
Source:本站原创 Posttime:2010-2-3 14:53:41
1.Winding machine is a two-chain structure. Maintained between inside and outside the chain, chain lubrication, plus HJ20-HJ40 Road Machinery oil film moving under the shelves there is jitter phenomenon, through the chain to eliminate tension.
2. Stretch film wrapping machine slow down or slip when the wheel, open wheel motor cover, release the deceleration of the four mounting plate connecting bolts, and then two tension adjustment bolt clockwise evenly, to achieve the required tension force, and Tighten the four connecting bolt. Machine in continuous use 10 to 15 Chain tension should be adjusted in the future.
3. Stretch film wrapping machine movements, chassis and film frame drive is completed through the worm gear speed governor, and in the use of the process, please use the following requirements.
1) The winding machine is lubricated gear oil immersion, immersion depth of the worm in the worm gear oil, or under the side for the whole worm gear is high; above for the worm outside diameter of 1 / 3;
2) keep pushing the use of synthetic gear oil 200 # (40 ℃ when the kinematic viscosity of 320);
3) oil for the oil Mirror Mirror 1 / 2, the center distance a = 63mm proposes to add 400ml;
4) 7-14 days after the operation to be replaced with new oil, each subsequent one-year replacement 1 times;
5) The ambient temperature shall be -40 +40 ℃ lower than that at 0 ℃ with low freezing point of the lubricant.
6) The gear reducer with grease lubrication, the use of the process do not have to replace oil, or a replacement according to the actual situation.
4. To place the packaging of goods should be as smooth as possible light to move gently so as to prevent or reduce the mechanical life of the chassis deformation.
5. The goods shall not exceed the design of packaging a high degree of stretch film wrapping machine, otherwise the results will affect the packaging.
6. The goods should be placed in the turntable stretch film wrapping machine, within as a result of the goods when it is too large beyond the scope of the 100mm of space within or under the actual operation of the machine, otherwise, it may damage the machine.
7. shut stretch film wrapping machine electrical cabinet, regular cleaning, checking electrical parts and electrical connections, in order to ensure the normal use of equipment
2. Stretch film wrapping machine slow down or slip when the wheel, open wheel motor cover, release the deceleration of the four mounting plate connecting bolts, and then two tension adjustment bolt clockwise evenly, to achieve the required tension force, and Tighten the four connecting bolt. Machine in continuous use 10 to 15 Chain tension should be adjusted in the future.
3. Stretch film wrapping machine movements, chassis and film frame drive is completed through the worm gear speed governor, and in the use of the process, please use the following requirements.
1) The winding machine is lubricated gear oil immersion, immersion depth of the worm in the worm gear oil, or under the side for the whole worm gear is high; above for the worm outside diameter of 1 / 3;
2) keep pushing the use of synthetic gear oil 200 # (40 ℃ when the kinematic viscosity of 320);
3) oil for the oil Mirror Mirror 1 / 2, the center distance a = 63mm proposes to add 400ml;
4) 7-14 days after the operation to be replaced with new oil, each subsequent one-year replacement 1 times;
5) The ambient temperature shall be -40 +40 ℃ lower than that at 0 ℃ with low freezing point of the lubricant.
6) The gear reducer with grease lubrication, the use of the process do not have to replace oil, or a replacement according to the actual situation.
4. To place the packaging of goods should be as smooth as possible light to move gently so as to prevent or reduce the mechanical life of the chassis deformation.
5. The goods shall not exceed the design of packaging a high degree of stretch film wrapping machine, otherwise the results will affect the packaging.
6. The goods should be placed in the turntable stretch film wrapping machine, within as a result of the goods when it is too large beyond the scope of the 100mm of space within or under the actual operation of the machine, otherwise, it may damage the machine.
7. shut stretch film wrapping machine electrical cabinet, regular cleaning, checking electrical parts and electrical connections, in order to ensure the normal use of equipment