Stretch film wrapping machine

Stretch film wrapping packaging machine is referred to as LLDPE stretch film wrapping machine for packaging materials, a variety of goods Wrapping a professional packaging machinery.
Today, the packaging than the general food largely inter vacuum packing machine packing, winding machine have also become popular to use. Using the winding machine for packaging of goods, can reduce packaging costs, convenient storage and transport, easy-to-packaging materials (film) for recycling, reduce environmental pollution. This packaging method has been widely used in glass manufacturing, paper, chemical industry, machinery manufacturing, food industry a variety of different industries, especially in the export trade, cargo transportation in containers they are generally only after the packaging through the winding machine packaged using the baler, thereby greatly increasing the transport of goods in the safety factor.
Winding Machines Category: pallet wrapping machine, cylinder winding machine, winding machine arm, ring body winding machine, horizontal winding machine, baggage wrapping machine, winding machine without pallet
Winding machine daily maintenance:
1. Inside and outside the chain of inter-winding machine to maintain lubrication of the chain, plus HJ20-HJ40 Road Machinery oil film moving under the shelves there is jitter phenomenon, through the chain to eliminate tension.
2. Turntable when you slow down or skid to open the turntable motor cover, release the deceleration of the four mounting plate connecting bolts, and then two tension adjustment bolt clockwise evenly, to achieve the required tension force, and tighten the four connected bolts.
3. Lift, chassis and membrane rack drive is completed through the worm gear speed governor, and in the use of the process, please use the following requirements:
1) using immersion oil lubrication of the reducer, the depth of immersion oil on the worm in the worm, or under the side for the whole worm gear is high; above for the worm outside diameter of 1 / 3;
2) recommend the use of synthetic gear oil 200 # (40 º C when the kinematic viscosity of 320);
3) oil for the oil Mirror Mirror 1 / 2, the center distance a = 63mm proposes to add 400ml;
4) The operation of 7-14 days after the winding machine must be replaced with new oil, each subsequent one-year replacement once;
5) The ambient temperature shall be -40 - +40 º C lower than 0 º C, when a low freezing point of lubricants;
Six) Gear Reducer with grease lubrication, the use of the process do not have to replace oil, or replaced according to the actual situation.
4. To place the packaging of goods should be as smooth as possible light to move gently so as to prevent or reduce the mechanical life of the chassis deformation.
5. The goods shall not exceed the design package height, otherwise, will affect the packaging effect.
6. The goods should be placed within the framework of the turntable, as a result of the goods should be in the 100mm is too large beyond the scope of or in actual space operations under the wrapping machine, or they will be damaged winding machine.
7. Should be shut electrical cabinets, regular cleaning, checking electrical fittings and electrical connections, in order to ensure that equipment properly.